Talking About Crawlspace Repairs

Improving The Quality Of Your Concrete Patches

by Clinton Stone

Concrete is one of the most prevalent materials used in construction today. With everything from foundations to driveways being poured out of concrete, repairing damaged concrete sections is an essential skill. Making use of prepackaged concrete to complete repairs can be a simple way to reduce the cost and stress associated with patching concrete.

Proper preparation is essential when it comes to improving the quality of your prepackaged concrete patches.

Make sure your purchase enough concrete.

Maintaining uniformity when pouring a concrete patch is critical to the overall stability of the cured concrete. The last thing you want to do is run out of prepackaged concrete mix when you are making repairs.

Before you begin patching a damaged area, you need to calculate how much concrete will be needed to complete the repair process. Excavate around the damaged area until you have a rectangular or square section of concrete that needs filling.

Multiply the length of the hole by its width and depth to discover the amount of prepackaged concrete that will be needed to complete your patch.

Purchase the right prepackaged concrete mix,

It's important to recognize that prepackaged concrete comes in many different varieties, If you want your repair work to remain structurally sound over time, you need to select a prepackaged mix that is formulated to last.

The strength of a concrete mix is indicated by a pounds per square inch measurement. The higher the PSI, the more sturdy the cement product will be. You can get away with using a weaker cement product when patching sidewalks or patios, but you will need a strong and durable prepackaged cement when patching a driveway or other concrete surface that will need to support a lot of weight.

Always finish your patch repairs by floating the concrete.

Whenever you are working with a concrete mix, you run the risk of air pockets forming within the section you are pouring. These air pockets could weaken the concrete once the cement mixture has dried, so it's critical you take action to eliminate them while making repairs.

Air pockets are eliminated through a process referred to as floating the concrete. Once your prepackaged mix has been poured into the area you are patching, smooth it out with a trowel and then pat the surface of the wet concrete firmly. This helps to compress the mixture and remove any air pockets that have formed during pouring. Contact a company, like P & L Concrete Products Inc., for more help.

Share